Page 81 of 84
Re: The1's Enhanced Factory Bins
Posted: Sat Jul 09, 2022 10:55 am
by immortality
Adjustable coil dwell time so we can use different coils would be good in conjunction with the LS coil ignition driver.
Re: The1's Enhanced Factory Bins
Posted: Sat Jul 09, 2022 4:18 pm
by hsv08
The1 wrote:Higher rate data logging
Adapt flash pcm type knock system
Spark cut
Some ECUs have more spare inputs, some inputs may need a wiring mod.
There's plenty to do lol
The higher rate data logging I've finished and tested on VS just need to adapt to all bins now. The rest are still being worked on.
Charlay86 has been working on updating and fixing a Factory Holden bug in the injector rate and low pulse adder table causing AFR instability at lower pulse widths. He's also been looking at the spare inputs.
Fantastic. I'm looking forward to it. Is there enough room to add a 0-5v input for the likes of a map sensor then a flex table like 11/12p that can activate an output for things like electronic boost control etc on maf based ecus?
I know it would be simpler to reloom and run 11P, but have a map sensor that can be logged against g/cyl would be beneficial for a few reasons.
Just a thought.
Re: The1's Enhanced Factory Bins
Posted: Sat Jul 09, 2022 10:22 pm
by charlay86
hsv08 wrote:The1 wrote:Higher rate data logging
Adapt flash pcm type knock system
Spark cut
Some ECUs have more spare inputs, some inputs may need a wiring mod.
There's plenty to do lol
The higher rate data logging I've finished and tested on VS just need to adapt to all bins now. The rest are still being worked on.
Charlay86 has been working on updating and fixing a Factory Holden bug in the injector rate and low pulse adder table causing AFR instability at lower pulse widths. He's also been looking at the spare inputs.
Fantastic. I'm looking forward to it. Is there enough room to add a 0-5v input for the likes of a map sensor then a flex table like 11/12p that can activate an output for things like electronic boost control etc on maf based ecus?
I know it would be simpler to reloom and run 11P, but have a map sensor that can be logged against g/cyl would be beneficial for a few reasons.
Just a thought.
These MAF pcms actually already support a map/baro input.
I'm planning to set it as an input to the existing supercharged v6 boost control code since that seems useful.
Re: The1's Enhanced Factory Bins
Posted: Sat Jul 09, 2022 10:27 pm
by charlay86
immortality wrote:Adjustable coil dwell time so we can use different coils would be good in conjunction with the LS coil ignition driver.
The dwell stuff is going that we can achieve is somewhat limited in scope because the system essentially works like a dizzy, but I'll go through the calcs and see what we can do. What exactly did you need?
Re: The1's Enhanced Factory Bins
Posted: Sun Jul 10, 2022 7:17 am
by hsv08
These MAF pcms actually already support a map/baro input.
I'm planning to set it as an input to the existing supercharged v6 boost control code since that seems useful.
That would be perfect!!!
Re: The1's Enhanced Factory Bins
Posted: Sun Jul 10, 2022 9:39 am
by immortality
charlay86 wrote:immortality wrote:Adjustable coil dwell time so we can use different coils would be good in conjunction with the LS coil ignition driver.
The dwell stuff is going that we can achieve is somewhat limited in scope because the system essentially works like a dizzy, but I'll go through the calcs and see what we can do. What exactly did you need?
Probably best to chat too SilentBob
memberlist.php?mode=viewprofile&u=7241 as he's now making a similar LS coil driver box.
Re: The1's Enhanced Factory Bins
Posted: Tue Jul 12, 2022 11:26 pm
by charlay86
Is anyone interested in flex fuel support?
Re: The1's Enhanced Factory Bins
Posted: Wed Jul 13, 2022 9:41 pm
by hsv08
charlay86 wrote:Is anyone interested in flex fuel support?
We dont really have alot of access to anything E10 or higher here in NZ sadly...
Re: The1's Enhanced Factory Bins
Posted: Wed Jul 13, 2022 9:43 pm
by hsv08
Also on a side note on the VX or VY XDFs, Is there any known locations to turn off the auto 1-2 shift? The eraly stuff has it defined but not the VX VY?
Re: The1's Enhanced Factory Bins
Posted: Thu Jul 14, 2022 9:49 am
by charlay86
hsv08 wrote:Also on a side note on the VX or VY XDFs, Is there any known locations to turn off the auto 1-2 shift? The eraly stuff has it defined but not the VX VY?
The locations can be found, it just takes time.
The transmission programs are very similar, so all the parameters will be in the same order.
So if you calculate the difference between the addresses in the two files you can probably define it yourself.